available GLOBALLY from: Concept Promotions
CYPRUS T/F: (+357) 24 624 810  or  (+357) 99 106 727 / 99 104 067
UK T: +44 207 183 1895    Fax: +44 207 183 1905
Email:  info@conceptpromotions.com
www.ConceptPromotions.com

Fuel Cat

available GLOBALLY from Concept Promotions

Home The Product Benefits Fuel Usage Fitting

FITTING INSTRUCTIONS FOR IN-LINE UNITS

WHERE TO FIT

Fit the FUEL CAT unit to the fuel line as close as possible to the engine inlet manifold. Ensure the unit is fitted to the fuel supply line NOT the return line.

Follow flow direction arrows, where applicable.

Optimum points for installation, may be,

CARBURETTOR ENGINES

(A) Between the fuel lift pump and carburettor.
(B) Between the fuel regulator and carburettor.
(C) Between the fuel filter and carburettor.

FUEL INJECTED ENGINES

(A) Between the fuel filter and injection distributor.
(B) Between the fuel pump and filter at rear of vehicle.
(C) Between the fuel filter and main fuel supply rail.

DIESEL ENGINES

(A) Between the fuel lift pump and filter.
(B) Between the fuel filter, agglomerate and sedimentor.

IN ALL CASES, UNIT MUST BE FITTED TO FUEL SUPPLY LINE NOT THE RETURN LINE.

INSTALLATION.

(1) Determine position to fit unit and using clips supplied, mount unit securely.
(2) Cut fuel line, slide fuel line over adapters and secure with hose clamps. Use only high pressure fuel line when fitting to fuel injection or diesel.
(3) Bleed system if diesel engine.
(4) Drop Fuel Cat unit into tank, if required. Diesel engines.
(5) Start engine and CHECK FOR FUEL LEAKS.

CARE MUST BE TAKEN TO PREVENT THE FOLLOWING.


CHANGING FROM LEADED FUEL TO UNLEADED FUEL

When changing from leaded to unleaded fuel on older vehicles, it is recommended that for the first two tank of unleaded, the vehicle is not driven under load.

WARNING:  Remember you are dealing with highly flammable liquid with petrol. Take care not to cause metal to metal sparks and keep naked flame away from area. FUEL CAT LTD can not be held responsible for any accidents arising from fitment of a FUEL CAT unit. If you have any doubts, please consult a garage or mobile tuning fitter.